Punch and Dies Tableting

Standard : TSM / IPT / EURO

Material :

• Standard O.H.N.S. (O1 Grade): In-Expensive A good general purpose material punches, Good Load Taking Capacity Better Tool Life & less breakage as compared to D3
• Premium S7: Better load taking capacity as comparing to O1 Steel & hence less Chance of damaging to tip under high pressure. Good abrasion resistant steel with high compressive strength for Punches and die.
• Stainless Steel SS: Do not have good load taking capacity therefore chances is more for tip bending, it’s very good for corrosion, staining and Discoloration it can be washed with water & detergent.
• H.C.H.Cr (D3 Grade): Do not have good load taking capacity as comparing to O1 & S7 steel., Therefore more chances of tip breaking under higher pressure. Its wear resistant therefore Minimum wear & tear. Dies are manufactured specially with D3 Grade also Its recommended for products having abrasive / corrosive nature.
• Powder Metallurgy: An alternative to Tungsten Carbide for Dies only. A step up in both wear resistance and toughness from Premium for punches.
• Tungsten Carbide: Improves wear resistance of die bores when compressing aggressive product.

Shape : Round, Capsule, Oblong, Oval, Special Shape, Triangle, Etc.

Engraving : Flat, Convex, Beveled, Bisects, Logos, Etc.

Embossing : Alphabetic Letters / Numeric, Company Logos, Laser Marking, Etc